Page 1 of 2

compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 07:28
by kaisarTOP
Sesuai judul di atas.... Arti nya dan maksudnya apa yah ..? :pyg maklum newbie.... setelah menemukan pesawat yg cocok. ko ada tulisan itu.
mohon pencerahan suhu2 yg baik hati... :mwr

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 09:28
by christoffel
waduh, ini artinya pesawat yg mau dibeli termasuk yg imut2. biasanya malah indoor ...
servonya yg micro, jadi connector-nya juga yg micro.
jadi RX nya minta yg micro juga (connector servonya)
ini gambar connectornya :
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=19565
ini contoh rx nya yg pake connector seperti dimaksud :
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18827

bukan harus beli ini lho ya. ini cuman contoh saja.

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 10:00
by kaisarTOP
makasih suhu crish... ternyata Rx ada yg micro jg yah :shy
bisa gak suhu pake Rx biasa tapi keluaran conector nya di modif jd conector micro...?

iya suhu, pesawat yg itu...

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 10:54
by christoffel
bisa ... nggak masalah

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 10:56
by iwan21
kaisarTOP wrote:makasih suhu crish... ternyata Rx ada yg micro jg yah :shy
bisa gak suhu pake Rx biasa tapi keluaran conector nya di modif jd conector micro...?

iya suhu, pesawat yg itu...


bisa, cuman kalo utk dipake di mikro ya berat rx nya, karena rx mikro rata2 beratnya dibawah 3 gr

kalo saya malah saya solder semua kabel2 dari servo2 dan esc ( padahal udah mikro semua, bahkan ada yg pake pitch 1,1 mm konektornya), lumayan ngurang2in berat 1 gr kalo utk kelas pesawat mikro 20 gr hehehehehe

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 11:02
by kaisarTOP
christoffel wrote:bisa ... nggak masalah


:ok :thx suhu chris, jadi semangat lg wat minang tuh pesawat... :ha3

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 11:04
by rasyidrisyad
kaisarTOP wrote:
christoffel wrote:bisa ... nggak masalah


:ok :thx suhu chris, jadi semangat lg wat minang tuh pesawat... :ha3

tampilin Om pesawat nya kaya gimana? :thx

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 11:06
by kaisarTOP
iwan21 wrote:
kaisarTOP wrote:makasih suhu crish... ternyata Rx ada yg micro jg yah :shy
bisa gak suhu pake Rx biasa tapi keluaran conector nya di modif jd conector micro...?

iya suhu, pesawat yg itu...


bisa, cuman kalo utk dipake di mikro ya berat rx nya, karena rx mikro rata2 beratnya dibawah 3 gr

kalo saya malah saya solder semua kabel2 dari servo2 dan esc ( padahal udah mikro semua, bahkan ada yg pake pitch 1,1 mm konektornya), lumayan ngurang2in berat 1 gr kalo utk kelas pesawat mikro 20 gr hehehehehe


:hah udah micro masih di modif jg suhu, saking semangatnya mengikuti program Diet.... :ha3 :ha3
patut di coba jg nich suhu iwan. :mwr
:thx suhu info nya....

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 11:27
by kaisarTOP
rasyidrisyad wrote:tampilin Om pesawat nya kaya gimana? :thx


siyaaap om... heeeee..

ini penampakan nya om :
Image
Image

Re: compatible RX with 1.25mm Molex 3 Pin Connectors

Posted: 24 Nov 2011, 11:47
by rasyidrisyad
kaisarTOP wrote:siyaaap om... heeeee..

ini penampakan nya om :
Image
Image

... keren Om penampakannya ... minimalis dan warnanya itu menyejukan :plk :plk :plk