Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 22:38
Maka selesailah the Black-Edge 540 !
Voila !!!
The Black-Edge ready for its Maiden
Grage Aeromodelling
Komunitas Aeromodelling Nusantara
https://www.gaero.org/
Let's Build & Hover the Black-Edge
Page 3 of 15
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 22:41
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 22:46
Waw mantap hasil karyanya pak , memang seniman balsa sejati .........
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 22:48
Selanjutnya, duduk tarik napas, sawang2 sambil setal-setel linkage…, nyalain rokok dulu.
Tepat Jam 12:00 siang.= 4 jam 30 mnt
Kutak kutik, selebihnya tidak dihitung work hour lagi…
Power plant & Fuel tank arrangement,
Ini saya ambil harga balsa paling mahal yg local.
Setau saya, harganya antara 9000 s/d 15.000,- per lembar.
Nah hardware lain yg saya tandai ???, mungkin oom2 sekalian malah lebih tau harganya di Lokal HS.
Sekali lagi ndak perlu Bolbering-2 an dan yg mahal segala macem !
Dan lainnya seperti Tanki, Fuel Line, pernak pernik,
Coba kira2 total jadi berapa ya.. ???
Terus kita bandingkan dengan beli Kit nya atau malah ARF nya.
Seandainyapun scrath build ini lebih mahal, saya lebih puas karena tau segala macem jeroan nya.., dan bebas setal/setel dari awal.
Balsa
Ribs : 3 x 1.5mm, Rp. 45.000
Spar, TE/LE : 2 x 8mm, Rp. 30.000
LE Stick : 1 x 10mm, Rp. 15.000
Wing Sheeting : 6 x 1.5mm, Rp. 90.000
Fuse Sheeting : 4 x 2mm, Rp. 60.000
Control Surface : 2 x 6mm, Rp. 30.000
Frame, Misc : 1 x 6mm, Rp. 15.000
Plywood, 1mm : 40x40cm, Rp. 15.000
Plywood, 5mm : 30x30cm, Rp. 10.000
Foam 5mm, ??? : 50x50cm, Rp. ???
Approx, Total Wood & Foam =
Hardware
Pushrod & Clevises : 5 set ???
Hinges : 16 pieces ???
Fuel Tank : 8oz ???
Landing gear 5mm : 1/5 Mtr ???
Wheel : 2”, ???
Wheel Collar : 2 set, ???
Bolt & Nuts : 8 set ???
Covering Film : 1 1/4 roll, Rp. 175.000,-
Glue : CA & Wood, Rp. 25.000,-
Est Total (Minus ???) = Rp. 510.000,-
Total Work Hours:
61 hrs 30 mnt, in 5 Weeks
Final result/spec, ready for maiden:
Black-Edge 540 (Blekej faiforti)
WingSpan: 47,8”
Engine used: OS .46 FX, Tower Muffler
Prop: 12.25 x 3.75 APC
Radio Used: Futaba 8U
Servo: JR NES-511, Hitec HS-80
Fuel: 5% Synth Cast Blend
Dry Weight RTF: 1920 grams !!!
To be continued with:
Maiden, Flight report, & Prelude to the Hover (Posing Time) !
Tunai sudah janji eYang…
I kept my words, and the rest is all up to you…
Built your self .., and you’ll have your own Pride and Joy !
Happy New Year and have a wonderful world of Fun Fly…
Tepat Jam 12:00 siang.= 4 jam 30 mnt
Kutak kutik, selebihnya tidak dihitung work hour lagi…
Power plant & Fuel tank arrangement,
Bill of Material
Ini saya ambil harga balsa paling mahal yg local.
Setau saya, harganya antara 9000 s/d 15.000,- per lembar.
Nah hardware lain yg saya tandai ???, mungkin oom2 sekalian malah lebih tau harganya di Lokal HS.
Sekali lagi ndak perlu Bolbering-2 an dan yg mahal segala macem !
Dan lainnya seperti Tanki, Fuel Line, pernak pernik,
Coba kira2 total jadi berapa ya.. ???
Terus kita bandingkan dengan beli Kit nya atau malah ARF nya.
Seandainyapun scrath build ini lebih mahal, saya lebih puas karena tau segala macem jeroan nya.., dan bebas setal/setel dari awal.
Balsa
Ribs : 3 x 1.5mm, Rp. 45.000
Spar, TE/LE : 2 x 8mm, Rp. 30.000
LE Stick : 1 x 10mm, Rp. 15.000
Wing Sheeting : 6 x 1.5mm, Rp. 90.000
Fuse Sheeting : 4 x 2mm, Rp. 60.000
Control Surface : 2 x 6mm, Rp. 30.000
Frame, Misc : 1 x 6mm, Rp. 15.000
Plywood, 1mm : 40x40cm, Rp. 15.000
Plywood, 5mm : 30x30cm, Rp. 10.000
Foam 5mm, ??? : 50x50cm, Rp. ???
Approx, Total Wood & Foam =
Hardware
Pushrod & Clevises : 5 set ???
Hinges : 16 pieces ???
Fuel Tank : 8oz ???
Landing gear 5mm : 1/5 Mtr ???
Wheel : 2”, ???
Wheel Collar : 2 set, ???
Bolt & Nuts : 8 set ???
Covering Film : 1 1/4 roll, Rp. 175.000,-
Glue : CA & Wood, Rp. 25.000,-
Est Total (Minus ???) = Rp. 510.000,-
Total Work Hours:
61 hrs 30 mnt, in 5 Weeks
Final result/spec, ready for maiden:
Black-Edge 540 (Blekej faiforti)
WingSpan: 47,8”
Engine used: OS .46 FX, Tower Muffler
Prop: 12.25 x 3.75 APC
Radio Used: Futaba 8U
Servo: JR NES-511, Hitec HS-80
Fuel: 5% Synth Cast Blend
Dry Weight RTF: 1920 grams !!!
To be continued with:
Maiden, Flight report, & Prelude to the Hover (Posing Time) !
Tunai sudah janji eYang…
I kept my words, and the rest is all up to you…
Built your self .., and you’ll have your own Pride and Joy !
Happy New Year and have a wonderful world of Fun Fly…
----------------- the end -----------------
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 22:50
whoadaoooowwwww, cuma udah tinggal dikit lagi tulisan ---The End---
Oom Kucing ama Kiai Nedi udah gak tahan
Waduuuuuhhh, kacau, bisa di omelin si Blur nih...
Gimana oom Dom's..., gak sulit kan ???
Oom WR, oom i21, oom Admins
Mohon dimaap ya kalo postingan saya kegedean...
Met Taon baru...
Oom Kucing ama Kiai Nedi udah gak tahan
Waduuuuuhhh, kacau, bisa di omelin si Blur nih...
Gimana oom Dom's..., gak sulit kan ???
Oom WR, oom i21, oom Admins
Mohon dimaap ya kalo postingan saya kegedean...
Met Taon baru...
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 22:58
Uiiiihhhh mantab om... mau tanya2x masih binun kan belom pernah bikin dari balsa...jd pengen nyoba bikin nih...
penjelasan TOPMARKOTOB om......
penjelasan TOPMARKOTOB om......
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 23:05
We'll see the Flight Report soon eh !
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 23:06
@ Pak Wisnu : besok maiden dimana pak ...., udah lama ngga main bareng lagi ..........
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 23:10
nedi wrote:@ Pak Wisnu : besok maiden dimana pak ...., udah lama ngga main bareng lagi ..........
Iya Pak, kami rindu nih....
Paparannya mantap sumantap!!!!!!
Enak dibaca dan perlu...!!!!
Mau tanya Om, dulu wkt Om blm expert spt sekarang, berapa lama Om ngerakit sebuah WD????
(Om Kucing ama Om Nedi gak usah komentar ya...) :lol:
Re: Let's Build & Hover the Black-Edge
Posted: 27 Dec 2008, 23:15
su-31 wrote:We'll see the Flight Report soon eh !
Wah..wah..wah..keren....mantaf....salute Om...
