Reciever micro JR DSX7 apa buat micro plane?
Posted: 28 Jul 2011, 21:47
Suhu-2, saya barusan beli micro plane seperti dibawah ini tapi saya bingung dengan reciever micro buat JR DSX7 saya.
Kira2 reciever micro apa yg cocok dan terjangkau harganya?
Mohon Petunjuk.

The Micro Profile J3 comes with a brushed motor/gear box combo and a 3A brushed ESC pre-wired so there is no need to solder. The strong EPP foam will handle knocks and makes the J3 a blast for indoor flying. You will require 2 Ultra Micro linear servos, a 100~138mAH 1S battery and your own transmitter and receiver (Tx/Rx) to complete this model.
Specs:
Material: EPP/Carbon
Wingspan: 360mm
Length: 255mm
Flying Weight: 19g
3 Channel~2 Servo (rudder, elevator, throttle)
Includes:
GPS6 Brushed Motor/bearbox Assembly (Included)
3A Brushed ESC (Included)
Hardware
4x2.5 Prop
Requires:
Your Own 4ch RX/TX
2 x Ultra Micro Linear Servo
138mAh 1s Lipoly
Kira2 reciever micro apa yg cocok dan terjangkau harganya?
Mohon Petunjuk.

The Micro Profile J3 comes with a brushed motor/gear box combo and a 3A brushed ESC pre-wired so there is no need to solder. The strong EPP foam will handle knocks and makes the J3 a blast for indoor flying. You will require 2 Ultra Micro linear servos, a 100~138mAH 1S battery and your own transmitter and receiver (Tx/Rx) to complete this model.
Specs:
Material: EPP/Carbon
Wingspan: 360mm
Length: 255mm
Flying Weight: 19g
3 Channel~2 Servo (rudder, elevator, throttle)
Includes:
GPS6 Brushed Motor/bearbox Assembly (Included)
3A Brushed ESC (Included)
Hardware
4x2.5 Prop
Requires:
Your Own 4ch RX/TX
2 x Ultra Micro Linear Servo
138mAh 1s Lipoly

